QSD2030 Datasheet | Fairchild Semiconductor

Features - PIN photodiode - Package type: T-1 3/4 (5mm lens diameter) - Wide reception angle, 40° - Package material and color: clear epoxy Package Dimensions 0.195 (4.95) - High sensitivity - Peak sensitivity λ = 880nm - Radiant sensitive area: 1.245mm x 1.245mm REFERENCE SURFACE 0.305 (7.75) 0.800 (20.3) MIN 0.040 (1.02) NOM Schematic CATHODE 0.050 (1.25) CATHODE 0.100 (2.54) NOM 0.020 (0.51) SQ. (2X) 0.240 (6.10) 0.215 (5.45) Notes: 1. Dimensions for all drawings are in inches (mm). 2. Tolerance of ±0.010 (0.25) on all non-nominal dimensions unless otherwise specified. ANODE ©2018 Semiconductor ponents Industries, LCC QSD2030 Rev. 2 .onsemi. - Plastic Silicon Photodiode Absolute Maximum Ratings (TA = 25°C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the remended operating conditions and stressing the parts to these levels is not remended. In addition, extended exposure to stresses above the remended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter TOPR TSTG TSOL-I TSOL-F VBR Operating Temperature Storage Temperature Soldering Temperature (Iron)(2,3,4) Soldering Temperature (Flow)(2,3) Reverse Breakdown Voltage Power Dissipation(1) Notes: 1. Derate power dissipation linearly 1.33m W/°C above 25°C. 2. RMA flux is remended. 3. Methanol or isopropyl alcohols are remended as cleaning agents. 4. Soldering iron 1/16” (1.6mm) minimum from housing. Rating -40 to +100 -40 to +100 240 for 5 sec 260 for 10 sec 50 100 Unit °C °C °C °C V m W Electrical/Optical Characteristics (TA...