FSFR1800XSL Datasheet | Fairchild Semiconductor

Belongin to Firmw are. Versione V 1.0 Gas probe HCF100 Refrigerant FREON 410A, R134A, 407C The new HCF100 is born from the elegance and prestige that has always distinguished BEINAT S.r.l. and from the home fitness concept. The probe is a Catalytic gas detection unit with IP55 protection that, together with one of BEINAT’s industrial type Control Units, detects the presence of TOXIC GASES such as: Refrigerant FREON. The probe is managed by a microprocessor which not only supplies an alarm signal to the control unit connected to it, but also allows execution of a self-diagnosis and therefore an AUTOMATIC CALIBRATION, in order to always have the maximum detection accuracy. The self-calibration means the probe adapts in harsh and variable temperature environments, avoiding false alarms due to anomalous events. The probe has a 0 ÷ 999 ppm linear output, conforming to the 4 ÷ 20m A standard. Instrument of testing MS222 Using the MS222 instrument created for the event, and supplied to the technicians, it is possible to see how many calibration corrections were made, read the gas concentration detected, check how many times it issued an alarm, check the number of voltage failures, and see the out of service removal date. Furthermore, being provided with serial transmission, its plant control and verification report can be printed, thus certifying your own work. Firmw are. Istallation and user guide Ver 3 .1 F i rsione mwa re Version 1.0 C O N F OR M I T Y EN50270 Important Note Before connecting the unit careful reading of instruction booklet is remended, and it is kept in a safe place for future reference. Furthermore, the correct electrical connections according to the enclosed drawings, plying with instructions and Regulations in force, is remended. Free Datasheet http://.. The installation of the detector does not exempt from ... ... The pliance with all regulations concerning the characteristics, installation and use of gas...