Datasheet4U Logo Datasheet4U.com

FSA800 - USB2.0 High-Speed Audio Switch

General Description

The FSA800 is a 3:1 USB accessory switch that enables USB data, stereo and mono audio, microphone, and UART data to share a common connector port.

It is designed for high-speed USB 2.0 signaling.

Key Features

  • 3:1 Switch Handles: Audio Headsets UART High- and Low-Speed USB Data USB Charger Detection and Indication.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSA8008A Audio Jack Detection and Configuration Switch ON Semiconductor
FSA8039A Audio Jack Interface ON Semiconductor
FSA831 USB2.0 High-Speed Charger Detection onsemi
FSA831A USB2.0 High-Speed Charger Detection ON Semiconductor
FSA07N60A N-Channel MOSFET IPS

Other Datasheets by Fairchild (onsemi)

Part Number Description
FSA8008 Audio Jack Detection and Configuration Switch
FSA8008A Audio Jack Detection and Configuration Switch
FSA8029 Audio Jack Send/End Detection
FSA8049 Audio Jack Detection
FSA806 USB2.0 High-Speed Audio Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FSA800 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability September 2009 FSA800 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability Features ƒ 3:1 Switch Handles: Audio Headsets UART High- and Low-Speed USB Data USB Charger Detection and Indication Description The FSA800 is a 3:1 USB accessory switch that enables USB data, stereo and mono audio, microphone, and UART data to share a common connector port. It is designed for high-speed USB 2.0 signaling. The architecture is designed to allow audio signals to swing below ground so a common USB and headphone jack can be used for personal media players and portable peripheral devices.