FPF1016
Features
- 0.8 to 1.8V Input Voltage Range
- Typical RDS(ON) = 34mΩ @ VON
- VIN = 2.0V
- Output Discharge Function
- Internal Pull down at ON Pin
- Accurate Slew Rate Controlled Turn-on time
- Low < 1µA Quiescent Current
- ESD Protected, above 8000V HBM, 2000V CDM
- Ro HS pliant
- Free from Halogenated pounds and Antimony Oxides tm
1V Rated Advanced Load Management Products
General Description
The FPF1015/6/7/8 series is an Intelli MAX advanced slew rate loadswitch offering a very low operating voltage. These devices consist of a 34mΩ N-channel MOSFET that supports an input voltage up to 2.0V. These slew rate devices control the switch turn-on and prevent excessive in-rush current from the supply rails. The input voltage range operates from 0.8V to 1.8V to fulfill today's lowest Ultraportable Device's supply requirements. Switch control is via a logic input (ON) capable of interfacing directly with low voltage control signals. The FPF1016 and FPF1018 have an On-Chip pull down...
