Datasheet4U Logo Datasheet4U.com

FNB50560T1 - Motion SPM 55 Series

General Description

FNB50560T1 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors.

Key Features

  • UL Certified No. E209204 (UL1557).
  • 600 V - 5 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections.
  • Low-Loss, Short-Circuit Rated IGBTs.
  • Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing.
  • Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input.
  • HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection.
  • Fault Output for Under-Voltage and Short-Circuit.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FNB50560T1 Motion SPM® 55 Series FNB50560T1 Motion SPM® 55 Series October 2014 Features • UL Certified No. E209204 (UL1557) • 600 V - 5 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections • Low-Loss, Short-Circuit Rated IGBTs • Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing • Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input • HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection • Fault Output for Under-Voltage and Short-Circuit Current Protection • Inter-Lock Function to Prevent Short-Circuit • Shut-Down Input • HVIC Temperature-Sensing Built-In for Temperature Monitoring • Optimized for 15 kHz Switching Frequency • Isolation Rating: 1500 Vrms / min.