FT602Q - FIFO to USB 3.0 UVC Bridge

Description

of each function please refer to Section 4.

Features

Supports USB 3.1 GEN 1 Super Speed.
(5Gbps) / USB 2.0 High Speed (480Mbps).
Supports USB Transfer Types:.
Control/Bulk/Interrupt.
Supports UVC version 1.1.
Supports up to 4 video input channels on the FIFO bus.
Supports 2 parallel slave FIFO bus protocols, 245 FIFO and Multi-channel FIFO mode, with a data burst rate up to 400MB/s with 32 bit parallel interface Built-in 16kB FIFO.

FTDI

📥 Download Datasheet

Datasheet Details

Part number	FT602Q
Manufacturer	FTDI
File Size	1.16 MB
Description	FIFO to USB 3.0 UVC Bridge
Datasheet	FT602Q Datasheet
Additional preview pages of the FT602Q datasheet.

📁 Similar Datasheet

FT6022 - MOS FET (Fujitsu)
FT6022D - MOS FET (Fujitsu)
FT60E021 - EEPROM (FMD)
FT60E022 - EEPROM (FMD)
FT60E023 - EEPROM (FMD)
FT60E024 - EEPROM (FMD)
FT60E025 - EEPROM (FMD)
FT60E02F - EEPROM (FMD)
FT60E11 - 8-bit RISC MCU (FMD)
FT60E12 - 8-bit RISC MCU (FMD)

Other Datasheets by FTDI

FT600Q - USB 3.0 to FIFO Bridge
FT601Q - USB 3.0 to FIFO Bridge

Full PDF Text Transcription

Click to expand full text

FT602Q IC Datasheet Version 1.5 Document No.: FT_001389 Clearance No.: FTDI#519 Future Technology Devices International Ltd. FT602Q IC Datasheet (FIFO to USB 3.0 UVC Bridge) The FT602 is a USB-to-FIFO interface to • SuperSpeed USB (USB 3.1 Gen 1) USB Video Class (UVC) bridge chip with the following • advanced features: • Supports USB 3.1 GEN 1 Super Speed • (5Gbps) / USB 2.0 High Speed (480Mbps) • • Supports USB Transfer Types: • Control/Bulk/Interrupt • • Supports UVC version 1.1 • • Supports up to 4 video input channels on the FIFO bus. • • Supports 2 parallel slave FIFO bus protocols, 245 FIFO and Multi-channel FIFO mode, with a data burst rate up to 400MB/s with 32 bit parallel interface Built-in 16kB FIFO data buffer RAM.

Published: Mar 24, 2018 |