FT4233H
FT4233H is High Speed USB Bridge manufactured by FTDI.
FT4233H HIGH SPEED USB BRIDGE WITH TYPE-C/PD CONTROLLER Datasheet
Version 1.0
Document No.: FT_001432 Clearance No.: FTDI#547
Future Technology Devices International Ltd
( High Speed USB Bridge with Type-C/PD Controller )
The FT4233H is a Hi-Speed USB device with a Type C/PD controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels patible with the FT4232H
- Quad Hi-speed USB to multipurpose UART/MPSSE solution.
The FT4233H has the following advanced Features
:
- -
- -
- - Support PD specification Rev 3.0.
- - Port1 mode configuration for Sink or Dual-role, supporting Fast Role Swap
- - Port2 works as Sink, supporting charge through to port1
- - Support 5V, 9V, 15V and 20V PDOs as sink or source
- Type-C/PD Physical Layer Protocol
- - PD policy engine using 32-bit RISC controller
- with 8k B data RAM and 48k B code ROM
- Support PD capability descriptors and requests
- - Options to use external MCU controlling PD
- policy through I2C interface
- USB to quad serial ports with a variety of
- configurations.
- Entire USB protocol handled on the chip. No USB
- specific firmware programming required.
- - USB 2.0 High Speed (480Mbits/Second) and Full
- Speed (12Mbits/Second) patible.
- Two Multi-Protocol Synchronous Serial Engine
(MPSSE) on channel A and channel B, to simplify synchronous serial protocol (USB to JTAG, I2C,
- SPI or bit-bang)...
