FT260Q Datasheet Text
FT260 (HID-class USB to UART/I2C Bridge IC) Datasheet
Version 1.3
Document No.: FT_001272 Clearance No.: FTDI#484
Future Technology Devices International Ltd.
FT260
(HID-class USB to UART/I2C Bridge IC)
FT260 is a HID-class USB to I2C/UART interface
- Device Controller with the following advanced
Features
:
- - Single chip USB to UART/I2C bridge with standard Human Interface Device (HID) class support
- - USB2.0 pliant Full Speed device with entire
USB protocol handled on the chip
- - Support 2 USB HID Interfaces, each corresponding to the on-chip physical interfaces, I2C and UART
- -
Pin configuration of enabling HID interface for variety of application
- - HID-over-I2C specification support
- - Configurable I2C Master Interface controller conforming to I2C v2.1 and v3.0 specification
- - Support 4 speed modes defined in I2C-bus specification, Standard mode (SM), Fast mode (FM), Fast mode plus (FM+), and High-Speed
- mode (HS)
- Robust FTDI UART controller with hardware and
- software flow control
- Data transfer rate from 1.2Kbaud to 12Mbaud
- (RS422, RS485, RS232) at TTL levels
- Configurable GPIOs can be easily controlled by
- software applications under HID class via the
- USB bus
- - I2C bit rate is up to 3Mbps
- With the latest Linux kernels, a new HID-FT260
- driver allows use of built in I2C-Tools mands....