FT234XD - USB to BASIC UART

FTDI

Key Features

Single chip USB to asynchronous serial data.
transfer interface.
Entire USB protocol handled on the chip. No USB.
specific firmware programming required.
Fully integrated 2048 byte multi-time-.
programmable (MTP) memory, storing device descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.

FT234XD usb to basic uart by FTDI - Datasheet Preview

Datasheet Details

Part number	FT234XD
Manufacturer	FTDI
File Size	915.23 KB
Description	USB to BASIC UART
Datasheet	FT234XD Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
FT232BL	USB UART	Future Technology Devices
FT232BQ	USB UART	Future Technology Devices
FT232H	Single Channel Hi-Speed USB to Multipurpose UART/FIFO	Future Technology Devices
FT2000A	Fast Silicon Rectifiers	Diotec Semiconductor
FT2000AA	Superfast Silicon Rectifiers	Diotec

Other Datasheets by FTDI

Part Number	Description
FT230X	USB to BASIC UART
FT230XQ-R	USB to BASIC UART
FT230XQ-xxxx	USB to BASIC UART
FT230XS-xxxx	USB to BASIC UART
FT231X	USB TO FULL HANDSHAKE UART

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

FT234XD USB TO BASIC UART IC Version 1.4 Document No.: FT_000753 Clearance No.: FTDI#324 Future Technology Devices International FT234XD (USB to BASIC UART IC) The FT234XD is a USB to serial UART interface with optimised packaging (3mm x 3mm 12 pin  DFN) for smaller PCB designs and the following advanced features:  Single chip USB to asynchronous serial data  transfer interface.  Entire USB protocol handled on the chip. No USB  specific firmware programming required.  Fully integrated 2048 byte multi-time-  programmable (MTP) memory, storing device descriptors and CBUS I/O configuration.   Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.