FT232HL Overview
strings configurable in external EEPROM over the USB interface. Configurable I/O drives strength (4, 8, 12 or 16mA) and slew rate. Low operating and USB suspend current.
FT232HL Key Features
- Single channel USB to serial / parallel ports
- Entire USB protocol handled on the chip. No
- USB specific firmware programming required
- USB 2.0 Hi-Speed (480Mbits/Second) and Full
- Multi-Protocol Synchronous Serial Engine
- (USB to JTAG, I2C, SPI (MASTER) or bit-bang)
- UART transfer data rate up to 12Mbaud
- shifter)
- Supports a proprietary half duplex FT1248
- interface with a configurable width, bi
