24C512A
24C512A is Two-Wire Serial EEPROM manufactured by FMD.
FEATURES
- Low voltage and low power operations:
- FT24C512A:
VCC = 1.8V to 5.5V
- Maximum Standby current < 1µA .
- 128 bytes page write mode.
- Partial page write operation allowed. l
- Internally organized: 65,536×8 (512K).
- Standard 2-wire bi-directional serial interface. tia
- Schmitt trigger, filtered inputs for noise protection.
- Self-timed write cycle (5ms maximum).
- 1 MHz (2.5-5V), 400 k Hz (1.8V) patibility.
- Automatic erase before write operation. n
- Write protect pin for hardware data protection.
- High reliability: typically 1,000,000 cycles endurance. e
- 100 years data retention.
- Industrial temperature range (-40o C to 85o C). fid
- Standard 8-pin DIP/SOP/MSOP/TSSOP/UDFN Pb-free packages.
DESCRIPTION n The FT24C512A series are 524,288 bits of serial Electrical Erasable and Programmable Read Only o Memory, monly known as EEPROM. They are organized as 65,536 words of 8 bits (one byte) each.
The devices are fabricated with proprietary advanced CMOS process for low power and low voltage
C applications. These devices are available in standard 8-lead DIP, 8-lead SOP, 8-lead MSOP, 8-lead TSSOP and 8-lead UDFN packages. A standard 2-wire serial interface is used to address all read and write functions. Our extended VCC range (1.8V to 5.5V) devices enables wide spectrum of applications.
D PIN CONFIGURATION
Pin Name
MA2, A1, A0 F SDA
Pin Function Device Address Inputs Serial Data Input / Open Drain Output
Serial Clock Input
Write Protect
No-Connect
Table 1
© 2016 Fremont Micro Devices Inc.
DS24C512-A1--page1
Fremont Micro Devices All three packaging types e in Pb-free certified.
FT24C512A
A0 1
8 VCC
A1 2
7...
