Technical Specifications
Range (F. S.)
From ±5 Nm to ±7,000 Nm [±4 lb-ft to ±5,600 lb-ft]
Over-range
Without Damage : 1.5 x F.S.
Accuracy
Combined Non Linearity & Hysteresis : ±0.25% F.S.
Temperature Range
Operating Temperature Range (OTR) : -20 to 80 °C [-4 to 176 °F]
Compensated Temperature Range (CTR) : 0 to 60 °C [32 to 140 °F]
Zero Shift in CTR : <0.5% F.S. / 108 °F
Sensitivity Shift in CTR : <1.10-4 / °F of reading
Electrical Characteristics
Model
CS1060
Supply Voltage
10 Vdc
F.S. Output
2 mV/V
Zero Offset
<±5% F.S.
Input Impedance/Consumption 350 to 700 ȍ
Output Impedance
350 to 700 ȍ
Insulation under 50 Vdc
100 Mȍ
CS1060-A1
10 to 30 Vdc
0.5 to 4.5 V
2.5 V ±5% F.S.
<50 mA
<10 ȍ
100 Mȍ
Electrical Termination
CS1060-A2
±15 Vdc (±12 to ± 18 Vdc)
±5 V
0 V ±5% F.S.
<50 mA
<10 ȍ
100 Mȍ
Connector output including mate
Mechanical Characteristics
Material : Body in stainless steel, aluminium alloy housing
Connection : Square male couplings standard depending on F.S. (see table on reverse side)
Other connection types on request (smooth shaft, cotter pin, etc.)
Product References
Low Level Output Sensor
Model
Full Scale Range (F.S.)
In lb-ft
Option(s)
ET1 : CTR -20 to 100 °C [-4 to 212 °F] OTR=CTR
PE : Cable Gland Termination with 2 m [6.5 ft] cable
CS1060
80
ET1
High Level Output Sensor
Model
Power Supply Reference
A1 : Unipolar-tension
A2 : Bipolar-tension
Full Scale Range (F.S.)
In lb-ft
Option(s)
ET1 : CTR -20 to 100 °C [-4 to 212 °F] OTR=CTR
PE : Cable Gland Termination with 2 m [6.5 ft] cable
CS1060
A1
80
ET1
Wiring Schematic
CS1060
CS1060-A1
CS1060-A2
Performance specifications nominal and subject to change without notice. Current specifications see web-site. June 15, 2005
116 West Chestnut St. EPHRATA PA 17522
Tel. (717) 721 9797 Fax. (717) 721 9859 www.fgpsensors.com info@gssensors.com
Free Datasheet http://www.datasheet-pdf.com/