Datasheet4U Logo Datasheet4U.com

ST16C2552 - 2.97V TO 5.5V DUAL UART WITH 16-BYTE FIFO

Description

The ST16C2552 (2552) is a dual universal asynchronous receiver and transmitter (UART).

The ST16C2552 is an improved version of the PC16552 UART.

The 2552 provides enhanced UART functions with 16 byte FIFOs, a modem control interface, and data rates up to 4 Mbps.

Features

  • may be tailored by external software to meet specific user requirements. Indepedendent programmable baud rate generators are privded to select transmit and receive clock rates from 50 Bps to 4 Mbps. The baud rate generator can be configured for either crystal or external clock input. An internal loop-back capability allows onboard diagnostics. The 2552 provides block mode data transfers (DMA) through FIFO controls. DMA transfer monitoring is provided through the signals TXRDY# and RXRDY#. An Alt.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST16C2450 DUAL UNIVERSAL ASYNCHRONOUSRECEIVER/TRANSMITTER STARTECH
ST16C32245 14 BIT DUAL SUPPLY BUS TRANSCEIVER LEVEL TRANSLATOR STMicroelectronics
ST16C450 UNIVERSAL ASYNCHRONOUS RECEIVER/TRANSMITTER STARTECH
ST16C452PS DUAL UART Exar
ST16C554 2.97V to 5.5V Quad UART MaxLinear

Other Datasheets by Exar (now MaxLinear)

Part Number Description
ST16C2550 2.97V TO 5.5V DUART
ST16C2450 (ST16C2450 / ST16C2451) 2.97V TO 5.5V DUART
ST16C2451 (ST16C2450 / ST16C2451) 2.97V TO 5.5V DUART
ST16C1450 (ST16C1450 / ST16C1451) 2.97V TO 5.5V UART
ST16C1451 (ST16C1450 / ST16C1451) 2.97V TO 5.5V UART

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
รกรง SEPTEMBER 2003 ST16C2552 2.97V TO 5.5V DUAL UART WITH 16-BYTE FIFO REV. 4.2 GENERAL DESCRIPTION The ST16C2552 (2552) is a dual universal asynchronous receiver and transmitter (UART). The ST16C2552 is an improved version of the PC16552 UART. The 2552 provides enhanced UART functions with 16 byte FIFOs, a modem control interface, and data rates up to 4 Mbps. Onboard status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by external software to meet specific user requirements. Indepedendent programmable baud rate generators are privded to select transmit and receive clock rates from 50 Bps to 4 Mbps. The baud rate generator can be configured for either crystal or external clock input.
Published: |