Datasheet4U Logo Datasheet4U.com

XR28V384 - 3.3V QUAD LPC UART

Description

The XR28V384 (V384) is a quad Universal Asynchronous Receiver and Transmitter (UART) for the Intel Low Pin Count (LPC) bus interface.

This device can replace or supplement a Super I/O device to add additional serial ports to the system.

Features

  • such as the 9-bit (multidrop) mode, IrDA mode and the Watchdog Timer can be enabled. The V384 is available in a 48-pin TQFP package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR28V384 3.3V QUAD LPC UART MaxLinear
XR28V382 3.3V DUAL LPC UART MaxLinear
XR20M1170 I2C/SPI UART MaxLinear
XR20M1170 I2C/SPI UART Exar Corporation
XR20M1172 TWO CHANNEL I2C/SPI UART MaxLinear

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XR28V382 3.3V DUAL LPC UART
XR2001 High Voltage / High Current Darlington Transistor Arrays
XR2002 High Voltage / High Current Darlington Transistor Arrays
XR2003 High Voltage / High Current Darlington Transistor Arrays
XR2004 High Voltage / High Current Darlington Transistor Arrays

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XR28V384 3.3V QUAD LPC UART WITH 128-BYTE FIFO NOVEMBER 2013 REV. 1.0.0 GENERAL DESCRIPTION The XR28V384 (V384) is a quad Universal Asynchronous Receiver and Transmitter (UART) for the Intel Low Pin Count (LPC) bus interface. This device can replace or supplement a Super I/O device to add additional serial ports to the system. The V384 UARTs support any 16-bit I/O address supported by the system. The register set is based on the industry standard 16550 UART, so the V384 operates with the standard serial port drivers without requiring a custom driver to be installed. The 128 byte Transmit and Receive FIFOs reduce CPU overhead and minimize the chance of buffer overflow and data loss.
Published: |