Datasheet4U Logo Datasheet4U.com

XR16M670 - 1.62V TO 3.63V HIGH PERFORMANCE UART

Description

The XR16M6701 (M670) is an enhanced Universal Asynchronous Receiver and Transmitter (UART) with 32 bytes of transmit and receive FIFOs, selectable transmit and receive FIFO trigger levels, automatic hardware and software flow control, and data rates of up to 16 Mbps at 3.3V, 12.5 Mbps at 2.5V and 7.

Features

  • Pin-to-pin compatible with XR16L570 in 24-QFN and 32-QFN packages.
  • Intel data bus Interface.
  • 16 Mbps maximum data rate.
  • Selectable TX/RX FIFO Trigger Levels.
  • TX/RX FIFO Level Counters.
  • Independent TX/RX Baud Rate Generator.
  • Fractional Baud Rate Generator.
  • Auto RTS/CTS Hardware Flow Control.
  • Auto XON/XOFF Software Flow Control.
  • Auto RS-485 Half-Duplex Direction Control.
  • Multidrop mode w/ Auto Addre.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR16M2550 HIGH PERFORMANCE LOW VOLTAGE DUART Exar Corporation
XR16M2551 HIGH PERFORMANCE LOW VOLTAGE DUART Exar Corporation
XR16M2650 HIGH PERFORMANCE LOW VOLTAGE DUART Exar Corporation
XR16M2651 HIGH PERFORMANCE DUART Exar Corporation
XR16M2750 HIGH PERFORMANCE DUART Exar Corporation

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XR16M654 1.62V TO 3.63V QUAD UART
XR16M654D 1.62V TO 3.63V QUAD UART
XR16M680 1.62V TO 3.63V HIGH PERFORMANCE UART
XR16M681 1.62V TO 3.63V UART
XR16M570 1.62V TO 3.63V HIGH PERFORMANCE UART

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XR16M670 1.62V TO 3.63V HIGH PERFORMANCE UART WITH 32-BYTE FIFO DECEMBER 2009 REV. 1.0.1 GENERAL DESCRIPTION The XR16M6701 (M670) is an enhanced Universal Asynchronous Receiver and Transmitter (UART) with 32 bytes of transmit and receive FIFOs, selectable transmit and receive FIFO trigger levels, automatic hardware and software flow control, and data rates of up to 16 Mbps at 3.3V, 12.5 Mbps at 2.5V and 7.5 Mbps at 1.8V with 4X data sampling rate. The Auto RS-485 Half-Duplex Direction control feature simplifies both the hardware and software for half-duplex RS-485 applications. In addition, the Multidrop mode with Auto Address detection increases the performance by simplifying the software routines.
Published: |