Datasheet4U Logo Datasheet4U.com

SP7648 - Low Reference High Efficiency Boost Regulator

Description

The SP7648 is an ultra-low quiescent current, high efficiency step-up DC-DC converter ideal for single cell Li-Ion or dual cell alkaline battery applications to drive various LEDs.

The SP7648 combines low quiescent current and excellent light-load efficiency of PFM control.

Features

  • synchronous rectification, a 0.3Ω charging switch, an anti-ringing inductor switch, under-voltage lockout and programmable inductor peak current. The device can be shut down by a 1nA active LOW shutdown pin. A very low 0.288V reference voltage is optimized for driving a constant current load.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP7648 PackageLow Reference High efficiency Boost Regulator Sipex
SP7601 29V High Voltage LED Driver Exar Corporation
SP7606 Wide Input Voltage Boost Controller Sipex Corporation
SP7611A (SP7611A - SP7614A) 2-4 Channel Low Dropout Linear LED Driver Sipex Corporation
SP7612A (SP7611A - SP7614A) 2-4 Channel Low Dropout Linear LED Driver Sipex Corporation

Other Datasheets by Exar (now MaxLinear)

Part Number Description
SP7612 Low Dropout Linear LED Driver
SP7614 Low Dropout Linear LED Driver
SP7652 6A 28V 600KHz Synchronous Step Down Regulator
SP7656 29V Non-Synchronous Buck Converter
SP7662 12A 300KHz Synchronous Step Down Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SP7648 Low Reference High Efficiency Boost Regulator November 2012 GENERAL DESCRIPTION The SP7648 is an ultra-low quiescent current, high efficiency step-up DC-DC converter ideal for single cell Li-Ion or dual cell alkaline battery applications to drive various LEDs. The SP7648 combines low quiescent current and excellent light-load efficiency of PFM control. The SP7648 features synchronous rectification, a 0.3Ω charging switch, an anti-ringing inductor switch, under-voltage lockout and programmable inductor peak current. The device can be shut down by a 1nA active LOW shutdown pin. A very low 0.288V reference voltage is optimized for driving a constant current load. APPLICATIONS  LED Driver  Camera Flash  Handheld Portable Devices Rev. 2.0.
Published: |