Datasheet4U Logo Datasheet4U.com

SP26LV431 - HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER

Description

The SP26LV431 is a quad differential line driver that meets the specifications of the EIA standard RS-422 serial protocol.

Features

  • Exar's BiCMOS process allowing low power operational characteristics of CMOS technology while meeting all of the demands of the RS-422 serial protocol over 60Mbps under load. The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The SP26LV431 features a driver enable control common to all four drivers that places the output pins in a high impedance state. Since the cabling can be as long as 4,000 feet, the RS-422 drivers of the SP26LV431 are equippe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP26LV431 High Speed / +3.3V Quad RS-422 Differential Line Driver Sipex
SP26LV432 High Speed / Low Power Quad RS-422 Differential Line Receiver Sipex
SP2638C Constant current and constant voltage primary control power switch SPMICRO
SP2638D constant current and constant voltage primary-side controlled power switch SPMICRO
SP2638F Primary side control constant current / constant voltage AC / DC control circuit Shenchuanghui Electronics

Other Datasheets by Exar (now MaxLinear)

Part Number Description
SP26LV432 HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER
SP202E High Performance RS-232 Line Drivers/Receivers
SP206 +5V RS-232 Serial Transceivers
SP207 +5V RS-232 Serial Transceivers
SP207E High ESD +5V RS-232 Transceivers

Full PDF Text Transcription

Click to expand full text
SP26LV431 HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER JUNE 2011 REV. 1.1.1 GENERAL DESCRIPTION The SP26LV431 is a quad differential line driver that meets the specifications of the EIA standard RS-422 serial protocol. The SP26LV431 features Exar's BiCMOS process allowing low power operational characteristics of CMOS technology while meeting all of the demands of the RS-422 serial protocol over 60Mbps under load. The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The SP26LV431 features a driver enable control common to all four drivers that places the output pins in a high impedance state.
Published: |