Datasheet4U Logo Datasheet4U.com

CLC1015 - Rail-to-Rail Amplifiers

Download the CLC1015 datasheet PDF. This datasheet also covers the CLC1005 variant, as both devices belong to the same rail-to-rail amplifiers family and are provided as variant models within a single manufacturer datasheet.

General Description

The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual) are low cost, voltage feedback amplifiers.

These amplifiers are designed to operate on +2.7V to +5V, or ±2.5V supplies.

The input voltage range extends 300mV below the negative rail and 1.2V below the positive rail.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (CLC1005-Exar.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
CLC1011 (CLCx011) Rail-to-Rail I/O Amplifiers Cadeka
CLC1014 (CLC1004 / CLC1014 / CLC3004) 750MHz Amplifiers Cadeka
CLC1001 Ultra-Low Noise Amplifier Cadeka
CLC1002 Ultra-Low Noise Amplifier Cadeka
CLC1003 RRIO Amplifier Cadeka

Other Datasheets by Exar (now MaxLinear)

Part Number Description
CLC1010 7.3MHz Rail-to-Rail Amplifiers
CLC1005 Rail-to-Rail Amplifiers
CLC1007 High Speed RRO Amplifiers
CLC1008 75MHz Rail-to-Rail Amplifiers
CLC1009 35MHz Rail-to-Rail Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CLC1005, CLC1015, CLC2005 Low Cost, +2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers General Description The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual) are low cost, voltage feedback amplifiers. These amplifiers are designed to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positive rail. The CLC1005, CLC1015, and CLC2005 offer superior dynamic performance with 260MHz small signal bandwidth and 145V/μs slew rate. The amplifiers consume only 4.2mA of supply current per channel and the CLC1015 offers a disable supply current of only 127μA.