Datasheet4U Logo Datasheet4U.com

PLR155 - Photo link Light Receiver Unit

General Description

The optical receiver is packaged with custom optic data link interface, integrated on a proprietary CMOS PDIC process.

The unit functions by converting optical signals into electric ones.

Key Features

  • 1. High PD sensitivity optimized for red light 2. Data : NRZ signal 3. Low power consumption for extended battery life 4. Built-in threshold control for improved noise Margin 5. Good ESD protection: up to 8KV 6. Pb Free 7. Receiver sensitivity: up to.
  • 27dBm (Min. for 16Mbps) up to.
  • 21dBm (Min. for 25Mbps).

📥 Download Datasheet

Datasheet Details

Part number PLR155
Manufacturer Everlight
File Size 119.92 KB
Description Photo link Light Receiver Unit
Datasheet download datasheet PLR155 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PLR101-1M PLASTIC FIBER OPTIC LINK NEC
PLR RF PLL Synthesizer Raltron Electronics
PLR01210-300 polymer ptc device Protek Devices
PLR0502 STEERING DIODE/TVS ARRAY COMBO Protek Devices
PLR0504F STEERING DIODE / TVS ARRAY COMBO Protek Devices

Other Datasheets by Everlight

Part Number Description
PLR131 Photo link Light Receiver Unit
PLR132 Photo link Light Receiver Unit
PLR135 Photo link Light Receiver Unit
PLR135-T10 Photolink- Fiber Optic Receiver
PLR135-T9 Photolink- Fiber Optic Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Technical Data Sheet Photo link Light Receiver Unit PLR155 Series Features 1. High PD sensitivity optimized for red light 2. Data : NRZ signal 3. Low power consumption for extended battery life 4. Built-in threshold control for improved noise Margin 5. Good ESD protection: up to 8KV 6. Pb Free 7. Receiver sensitivity: up to –27dBm (Min. for 16Mbps) up to –21dBm (Min. for 25Mbps) Descriptions The optical receiver is packaged with custom optic data link interface, integrated on a proprietary CMOS PDIC process. The unit functions by converting optical signals into electric ones. The unit is operated at 2.4 ~ 5.5 V and the signal output interface is TTL compatible with high performance at low power consumption. Applications 1. Digital Optical Data-Link 2.