Datasheet4U Logo Datasheet4U.com

EUP3651 - 1X/1.5X Charge Pump White LED Driver

Description

The EUP3651 is a high efficiency charge pump white LED driver.

It supports 4 white LEDs with regulated constant current for uniform intensity.

The EUP3651 maintains the highest efficiency by utilizing a 1.5X fractional charge pump and low dropout current regulators.

Features

  • z z z z z z z z z z z 1X/1.5X Mode for Ultra-High Efficiency Up to 25mA Output Current for Each Channel 2.7V to 5.5V Input Voltage 1MHz Fixed Switching Frequency Single-Wire Serial Pulse Interface to Set LED Current with 16-step Linear scale Soft Start Function Built-In Short-Circuit Protection Built-in Thermal Protection IQ.

📥 Download Datasheet

Datasheet Details

Part number EUP3651
Manufacturer Eutech Microelectronics
File Size 282.32 KB
Description 1X/1.5X Charge Pump White LED Driver
Datasheet download datasheet EUP3651 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP3618 Charge Pump Flash LED Driver Eutech
EUP3427 Synchronous Step-Down Converter Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP3654 1X/1.5X Charge Pump White LED Driver
EUP3010 1A Synchronous Step-Down Converter
EUP3010A 1A Synchronous Step-Down Converter
EUP3020 Dual High-Efficiency 1.5MHz 1A PWM Step-Down DC-DC Converter
EUP3265 3MHz Synchronous Step-Down DC-DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EUP3651 4-Channel, 1X/1.5X Charge Pump White LED Driver DESCRIPTION The EUP3651 is a high efficiency charge pump white LED driver. It supports 4 white LEDs with regulated constant current for uniform intensity. The EUP3651 maintains the highest efficiency by utilizing a 1.5X fractional charge pump and low dropout current regulators. A low external parts count (two 1uF flying capacitors and two small 1uF capacitors at VIN and VOUT) makes the EUP3651 ideally suited for small battery-powered applications. The EN logic input is used to enable, disable, and set current with a 16-step linear scale.The LED current can be configured between 5mA and 25mA. If EN is kept low for more than 1.5ms, the EUP3651 enters shutdown mode. The EUP3651 is available in a 12-pin 3mm x 3mm TDFN package.
Published: |