Datasheet4U Logo Datasheet4U.com

EUP3511 - 1 Amp Current Limited Load Switch

This page provides the datasheet information for the EUP3511, a member of the EUP3510 1 Amp Current Limited Load Switch family.

Datasheet Summary

Description

The EUP3510/3511 are Current Limited P-channel MOSFET power switches designed for high-side loadswitching applications.

The internal current-limiting circuit protects the input supply against large output short circuit current which may cause the supply to fall out of regulation.

Features

  • include thermal shutdown to prevent catastrophic switch failure from high current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. The EUP3510/3511 are available in 5 pin SOT-23 packages.

📥 Download Datasheet

Datasheet preview – EUP3511

Datasheet Details

Part number EUP3511
Manufacturer Eutech Microelectronics
File Size 246.83 KB
Description 1 Amp Current Limited Load Switch
Datasheet download datasheet EUP3511 Datasheet
Additional preview pages of the EUP3511 datasheet.

📁 Similar Datasheet

  • EUP3427 - Synchronous Step-Down Converter (Eutech)
  • EUP3618 - Charge Pump Flash LED Driver (Eutech)
  • EUP7998 - Sink/Source DDR Termination Regulator (Eutech)
  • EUP8090 - 1A Linear Li-Ion/Polymer Charger IC (Eutech)
Other Datasheets by Eutech Microelectronics
  • EUP3510 - 1 Amp Current Limited Load Switch
  • EUP3502A - 1.5A Line Switch
  • EUP3504 - 1.8A Line Switch
  • EUP3507 - 600mA Line Switch
  • EUP3542 - Dual Power-Distribution Switch
  • EUP3545 - USB Power-Distribution Switch
  • EUP3545A - USB Power-Distribution Switch
  • EUP3546 - Dual Power-Distribution Switch

Full PDF Text Transcription

Click to expand full text
EUP3510/3511 1 Amp Current Limited Load Switch DESCRIPTION The EUP3510/3511 are Current Limited P-channel MOSFET power switches designed for high-side loadswitching applications. The internal current-limiting circuit protects the input supply against large output short circuit current which may cause the supply to fall out of regulation. The current limit threshold is programmed with an external resistor from SET Pin to ground. The quiescent supply current is typically 8µA, making the device ideal for portable battery-operated equipment. In shutdown mode, the supply current decreases to less than 0.1µA.
Published: |