Datasheet4U Logo Datasheet4U.com

EUP2796 - Dual-Display White LED Driver

General Description

The EUP2796 is a charge-pump based white-LED driver that is ideal for mobile phone display backlighting.

It can drive up to 6 LEDs in parallel with up to 20mA through each LED.

Regulated internal current sources deliver excellent current and brightness matching in all LEDs.

Key Features

  • (keypad LEDs, for example). Brightness of the two groups can be adjusted independently with pulse-width modulated (PWM ) digital signals. The EUP2796 works off an extended Li-Ion input voltage range (2.7V to 5.5V). Voltage boost is achieved with a high-efficiency 3/2- gain charge pump. The EUP2796 is available in a 16-pin TQFN package.

📥 Download Datasheet

Datasheet Details

Part number EUP2796
Manufacturer Eutech Microelectronics
File Size 297.90 KB
Description Dual-Display White LED Driver
Datasheet download datasheet EUP2796 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP3427 Synchronous Step-Down Converter Eutech
EUP3618 Charge Pump Flash LED Driver Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP2794 White LED Driver
EUP2410 500KHz Synchronous Step-up Converter
EUP2412 500kHz Synchronous Step-Up Converter
EUP2471 1.5A Dual WLED Flash Driver
EUP2511 Boost Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EUP2796 Dual-Display White LED Driver with 3/2X Switched Capacitor Boost DESCRIPTION The EUP2796 is a charge-pump based white-LED driver that is ideal for mobile phone display backlighting. It can drive up to 6 LEDs in parallel with up to 20mA through each LED. Regulated internal current sources deliver excellent current and brightness matching in all LEDs. The LED-driver current sources are split into two independently controlled groups. The primary group (4 LEDs) can be used to backlight www.DataSheet4U.com the main phone display. The second group (2 LEDs) can be used to backlight a secondary display or to provide other lighting features (keypad LEDs, for example). Brightness of the two groups can be adjusted independently with pulse-width modulated (PWM ) digital signals.