ETK2011 Datasheet Digital audio power amplifier IC

Manufacturer: Etek Microelectronics

ETK2011 digital audio power amplifier ic by Etek Microelectronics - Datasheet Preview

Datasheet Details

Part number	ETK2011
Manufacturer	Etek Microelectronics
File Size	113.93 KB
Description	Digital audio power amplifier IC
Datasheet	ETK2011 Datasheet

General Description

ETK2011 is a digital audio power amplifier IC with maximum output of 2.5W (RL=4Ω)×1ch.

ETK2011 has a “Pure Pulse Direct Speaker Drive Circuit” which directly drives speakers while reducing distortion of pulse output signal and reducing noise on the signal, and realizes the highest standard low distortion rate characteristics and low noise characteristics among digital amplifier ICs for mobile use.

In addition, circuit design with fewer external parts can be made depend on the condition of use because corresponds to filter less.

Overview

General .

Key Features

nonclip output control function which detects output signal clip due to the over level input signal and suppress the output signal clip automatically. Also the nonclip output control function can adapt the output clip caused by power supply voltage down with battery. This is the difference from the traditional AGC (Auto Gain Control) or ALC (Auto Level Control) circuit. ETK2011 has the powerdown function which can minimize the power consumption in the standby state. As for protection function.

More Datasheets from Etek Microelectronics

Part Number	Description
ETK145	Digital audio power amplifier IC
ETK4800	2-channel class AB headphone amplifier
ETK4812	Dual audio power amplifier
ETK4871	Shutdown mode audio amplifier
ETK4888	Dual bridge-connected audio power amplifier
ETK4992	1.25 Watt Fully Differential Audio Power Amplifier
ETK4993	Fully differential audio power amplifier
ETK6201	LED Controller/Driver
ETK8303	3W mono filterless class-D amplifier
ETK8403	3W class-D audio amplifier