Datasheet4U Logo Datasheet4U.com

PTB20078 - 2.5 Watts/ 1525-1660 MHz INMARSAT RF Power Transistor

Description

The 20078 is a class AB, NPN, common emitter RF power transistor intended for 26 Vdc operation from 1525 to 1660 MHz.

Rated at 2.5 watts minimum output power, it may be used for both CW and PEP applications.

📥 Download Datasheet

Datasheet preview – PTB20078

Datasheet Details

Part number PTB20078
Manufacturer Ericsson
File Size 192.54 KB
Description 2.5 Watts/ 1525-1660 MHz INMARSAT RF Power Transistor
Datasheet download datasheet PTB20078 Datasheet
Additional preview pages of the PTB20078 datasheet.

📁 Similar Datasheet

  • PTB23001X - NPN microwave power transistors (NXP)
  • PTB23002U - NPN microwave power transistor (NXP)
  • PTB23003X - NPN microwave power transistor (NXP)
  • PTB23003X - NPN microwave power transistors (NXP)
  • PTB23005X - NPN microwave power transistors (NXP)
  • PTB23006U - Microwave power transistor (NXP)
  • PTB100 - Low Profile Slide Potentiometer (Bourns)
  • PTB32001X - NPN microwave power transistors (NXP)
  • PTB32003X - NPN microwave power transistors (NXP)
  • PTB32005X - NPN microwave power transistors (NXP)
Other Datasheets by Ericsson
  • PTB20074 - 14 watts/ 1.477-1.501 GHz Cellular Radio RF Power Transistor
  • PTB20077 - 0.7 Watts/ 1525-1660 MHz INMARSAT RF Power Transistor
  • PTB20079 - 10 Watts/ 1.6-1.7 GHz INMARSAT RF Power Transistor
  • PTB20003 - 4 Watts/ 915-960 MHz Cellular Radio RF Power Transistor
  • PTB20004 - 50 Watts/ 860-900 MHz Cellular Radio RF Power Transistor
  • PTB20005 - 15 Watts/ 860-900 MHz Cellular Radio RF Power Transistor
  • PTB20006 - 4 Watts/ 860-900 MHz Cellular Radio RF Power Transistor
  • PTB20007 - 30 Watts/ 935-960 MHz Cellular Radio RF Power Transistor

Full PDF Text Transcription

Click to expand full text
e PTB 20078 2.5 Watts, 1525–1660 MHz INMARSAT RF Power Transistor Description The 20078 is a class AB, NPN, common emitter RF power transistor intended for 26 Vdc operation from 1525 to 1660 MHz. Rated at 2.5 watts minimum output power, it may be used for both CW and PEP applications. Ion implantation, nitride surface passivation and gold metallization are used to ensure excellent device reliability. 100% lot traceability is standard. • • • • • • 2.5 Watts, 1525–1660 MHz Class AB Characteristics Gold Metallization Silicon Nitride Passivated Surface Mountable Available in Tape and Reel Typical Output Power vs. Input Power 4.5 Output Power (Watts) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 200 78 LO TC OD E VCC = 26 V ICQ = 20 mA f = 1.
Published: |