Datasheet4U Logo Datasheet4U.com

PGE60817 - EDFA Gain Block for DWDM Applications

General Description

The DWDM gain block is intended to be used as a booster amplifier in WDM/ DWDM networks.

The gain block has input and output power monitoring.

The input and output ports have isolators to attenuate spurious reflections in the system.

Key Features

  • Operating wavelength window: 1543-1558 nm.
  • Gain flatness < ± 0.5dB.
  • Low noise figure, typ.

📥 Download Datasheet

Datasheet Details

Part number PGE60817
Manufacturer Ericsson
File Size 285.77 KB
Description EDFA Gain Block for DWDM Applications
Datasheet download datasheet PGE60817 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PGEW1S03H Low-Cost High-Power Laser-Diode Excelitas
PGEW1S09H Low-Cost High-Power Laser-Diode Excelitas

Other Datasheets by Ericsson

Part Number Description
PGE60816 EDFA Gain Block for DWDM Applications
PGE60801 Erbium-Doped Fiber Amplifier for Digital Applications
PGE60802 Erbium-Doped Fiber Amplifier for Digital Applications
PGE60803 Erbium-Doped Fiber Amplifier for Digital Applications
PGE60821 EDFA Gain Block for DWDM Applications

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PGE 608 17 EDFA Gain Block for DWDM Applications Key Features • Operating wavelength window: 1543-1558 nm • Gain flatness < ± 0.5dB • Low noise figure, typ. <5.5 dB • +13 dBm output power • Input and output monitor diodes • Operation temperature range: -5 °C to 70 °C • Multisourced footprint • Small size (120x80x15 mm) Applications • Booster amplifier in single-channel or DWDM networks Description The DWDM gain block is intended to be used as a booster amplifier in WDM/ DWDM networks. The gain block has input and output power monitoring. The input and output ports have isolators to attenuate spurious reflections in the system. External electronic circutry is needed for biasing the pump laser and for controlling the pump laser temperature. Heat sink is provided via the bottom surface.