SG-10 Datasheet | Epson Company

.. Crystal oscillator SIP LOW/MEDIUM-FREQUENCY CRYSTAL OSCILLATOR Products number Q31 1 0 0 0 0 x x x x x 0 0 - - - - Low current consumption. Small suited to high-density mounting. Mountable on a standard printed circuit board. Cylindrical low/medium-frequency crystal unit builtin, thus assuring high reliability. Actual size Specifications (characteristics) Item Output frequency range Power source voltage Temperature range Max. supply voltage Operating voltage Symbol f0 VDD-GND VDD TSTG TOPR ∆f/f0 Specifications 10.0000 Hz to 153.6000 k Hz -0.3 V to +7.0 V 4.5 V to 5.5 V Remarks For output frequency, see the table below Storage temperature Operating temperature -55 °C to +125 °C -10 °C to +70 °C A: ±10 x 10-6 B: ±50 x 10-6 +10 x 10 / -120 x 10 -6 -6 Stored as bare product after unpacking Frequency tolerance Frequency temperature characteristics Frequency voltage characteristics Current consumption Duty Output voltage Output load condition (fan out) Output rise time Output fall time Oscillation start up time Aging Shock resistance VDD=5 V Ta=+25 °C -10 °C to +70 °C, taking Ta=+25 °C as the reference ±10 x 10-6 Max. l OP t W/t VOH VOL N/CL t TLH t THL t OSC fa S.R. 0.5 m A Max.. 40 % to 60 % (except for cases of 1/3 and 1/ 5 divided frequency.) VDD -1.0 V Min. 0.4 V Max. 1 TTL Max./15 p F Max. 60 ns Max. 50 ns Max. For more than 1 ms until VDD=0 V→4.5 V. 1 s Max. ±5 x 10-6/year Max. ±5 x 10-6 Max. Time at 4.5 V to be 0 s Ta=+25 °C ±3 °C, VDD=5 V, first year No load condition 1/2 VDD or 1.4 V level IOH= -40 µA IOL=1.6 m A TTL load/C-MOS load Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2 sine wave in 3 directions Unless otherwise stated, characteristics (specifications) shown in the above table are based on the rated operating temperature and voltage condition. External dimensions 4.6 Max. 16.0 Max. (Unit: mm) Output frequency table Oscillation source 32.768 k Hz,60.000 k Hz, 96.000 k Hz, 100.000 k Hz, 153.600 k...