EN25QH16B-2A
FEATURES
- Single power supply operation
- Full voltage range: 2.4-3.6 volt
- Serial Interface Architecture
- SPI patible: Mode 0 and Mode 3
- 16 M-bit Serial Flash
- 16 M-bit/2,048 K-byte/8,192 pages
- 256 bytes per programmable page
- Standard, Dual or Quad SPI
- Standard SPI: CLK, CS#, DI, DO, WP#, HOLD#
- Dual SPI: CLK, CS#, DQ0, DQ1, WP#, HOLD#
- Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3
- High performance
- 104MHz clock rate for Standard SPI
- 104MHz clock rate for two data bits
- 104MHz clock rate for four data bits
- Low power consumption
- 5m A typical active current
- 1 A typical power down current
- Uniform Sector Architecture:
- 512 sectors of 4-Kbyte
- 64 blocks of 32-Kbyte
- 32 blocks of 64-Kbyte
- Any sector or block can be erased individually
- Software and Hardware Write Protection:
- Write Protect all or portion of memory via software
- Enable/Disable...
