EN25P80 Overview
The EN25P80 is a 8M-bit (1024K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-patible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The EN25P80 is designed to allow either single Sector at a time or full chip erase operation.
EN25P80 Key Features
- Single power supply operation
- Full voltage range: 2.7-3.6 volt
- 8 Mbit Serial Flash
- 8 M-bit/1024 K-byte/4096 pages
- 256 bytes per programmable page
- High performance
- 75MHz clock rate
- Low power consumption
- 5 mA typical active current
- 1 μA typical power down current