Datasheet4U Logo Datasheet4U.com

WT6018 - Digital Monitor Controller

General Description

The WT6018 is a member of WT60XX microcontroller family.

It is specially designed for digital controlled multi-sync monitor.

Key Features

  • 8-bit 6502 compatible CPU, 4MHz operating frequency.
  • 8192 bytes ROM, 288 bytes SRAM.
  • 8MHz crystal oscillator.
  • 14 channels 8-bit/62.5kHz PWM outputs (8 open drain outputs & 6 CMOS outputs).
  • Sync signal processor with H+V separation, frequency calculation, H/V polarity detection/control.
  • Three free-running sync signal outputs for burn-in test (64kHz/62.5Hz, 48kHz/75Hz, 31kHz/60Hz).
  • Self-test pattern generator generates cross hatch picture.
  • Provide half freq.

📥 Download Datasheet

Datasheet Details

Part number WT6018
Manufacturer Unknown Manufacturer
File Size 527.16 KB
Description Digital Monitor Controller
Datasheet download datasheet WT6018 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WT6002 Active Diode Driver IC W2 Technology
WT6003 Active Diode Driver IC W2 Technology
WT6148 (WT6148 / WT6160) Digital Monitor Controller Weitrend
WT6160 (WT6148 / WT6160) Digital Monitor Controller Weitrend
WT61P4 Embedded Micro Controller Weltrend

Other Datasheets by Unknown Manufacturer

Part Number Description
WT6014 Digital Monitor Controller
WT6016 Digital Monitor Controller
WT60P1 Digital Monitor Controller
WT6116 microcontroller for digital controlled monitor
WT6124 microcontroller for digital controlled monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
WT6018 Digital Monitor Controller Ver. 1.41 Jul-31-1998 GENERAL DESCRIPTION The WT6018 is a member of WT60XX microcontroller family. It is specially designed for digital controlled multi-sync monitor. It contains 8-bit CPU, 8K bytes ROM, 288 bytes RAM, 14 PWMs, parallel I/O, SYNC processor, timer, DDC interface (slave mode I2C interface with DDC1), two 4-bit A/D convertors and watch-dog timer. FEATURES * 8-bit 6502 compatible CPU, 4MHz operating frequency * 8192 bytes ROM, 288 bytes SRAM * 8MHz crystal oscillator * 14 channels 8-bit/62.5kHz PWM outputs (8 open drain outputs & 6 CMOS outputs) * Sync signal processor with H+V separation, frequency calculation, H/V polarity detection/control * Three free-running sync signal outputs for burn-in test (64kHz/62.