3-Channel Constant Current LED Driver UCS1903
The product UCS1903 is the three-channel LED drive control circuit, internal integration MCU
digital interface, data latches, LED high voltage driver etc. Realize the alone grey scale because
through the periphery MCU to control this chip. The cascade connection control realizes the
outdoors big screen Bitmap luminous, Product has the excellent performance, and quality is
Output power: 15V max
Internal integration Regulator tube and the IC VDD PIN need to add resistance connection the
power. External No need to add regulator tube
256 grey scales can adjustment
Internal integration RC oscillator, clock synchronous according to data signal, the next Chip can
receive the Original signal because the before Chip receiver had finished and itself has function
of the Automatic correction signal.
Internal integration Reset circuit
PWM can control 256 grey scales, Scan frequency no less than 400 Hz / s
Serial interface, through the Single line finish the data receiving and decoding.
Linear transmission, can unlimited cascade connection
No need to add any circuit if transmission distance over 10 meters of tow points.
The low speed model cascade numbers are not less than 512 points and high model not less than
1024 points If the Refresh frequency 30Hz / s.
Data sending speed can reach to 400Kbps and 800Kbps two kinds
Support preset constant current drive mode, according to the Red lights luminous intensity weak
adjustment output current higher than the OUTG and OUTB. The White better
引出端排列 Pin Configurations: