MB05SN THRU MB10SN
SINGLE PHASE 0.5AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-25A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-0
MBS
0.028 0.7
Mechanical Data
· Case:Reliable low cost construction
utilizing molded plastic technique
· Terminals:Plated Leads Solderable per MIL-
STD-202,Method208
0.067(1.7)
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
SYMBOL MB05SN MB1SN MB2SN MB4SN MB6SN MB8SN MB10SN UNITS
VRRM
VRWM 50 100 200 400 600 800 1000 V
VDC
VRMS
35
70 140 280 420 560 700 V
Average Rectified Output Current @TA=40℃
IO
0.5 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
IFSM
Forward Voltage per element @IF=0.5A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Typical Junction Capacitance per leg
Typical Thermal Resistance per leg (Note 1)
Operating and Storage Temperature Range
VFM
IR
CJ
RθJA
RθJL
TJ,TSTG
25
0.95
5.0
500
13
70
20
-55to+150
A
V
uA
pF
℃/W
℃
Note:1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.sddydz.com
