HA-A137B-FREQ Datasheet | Unknown Manufacturer

CRYSTAL CLOCK OSCILLATORS CMOS patible Enable/Disable Data Sheet 0016J Rev. E HA-A1370/A1380 Series Description The HA-A1370 Series of quartz crystal oscillators provide enable/disable 3-state CMOS patible signals for bus connected systems. Supplying Pin 1 of the HA-A1370 units with a logic “0" enables the output on Pin 5. Alternately, supplying pin 1 of the HA-A1380 units with a logic “1" enables its Pin 5 output. In the disabled mode, Pin 5 presents a high impedance to the load. All units are resistance welded in an all metal package, offering RFI shielding, and are designed to survive standard wave soldering operations without damage. Insulated standoffs to enhance board cleaning are standard. Features - Wide frequency range- 0.5MHz to 20.0MHz - User specified tolerance available - Will withstand vapor phase temperatures of 253°C for 4 minutes maximum - Space-saving alternative to discrete ponent oscillators - High shock resistance, to 3000g - All metal, resistance weld, hermetically sealed package Electrical Connection Pin 1 4 5 8 Connection Enable Input Grd & Case Output VDD - 3.3 Volt operation - Low Jitter - High Q Crystal actively tuned oscillator circuit - Power supply decoupling internal - No internal PLL avoids cascading PLL problems - Low power consumption - Gold plated leads - Solder dipped leads available upon request Dimensions are in inches and (MM) 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc. .nelfc. CRYSTAL CLOCK OSCILLATORS HA-A1370/A1380 Series Continued CMOS patible - Enable/Disable Operating Conditions and Output Characteristics Electrical Characteristics Parameter Frequency Duty Cycle Logic 0 Logic 1 Rise & Fall Time Tpz Enable/Disable Logic High Voltage Enable/Disable Logic Low Voltage Jitter, RMS(2) Frequency Stability (1) Symbol --------VOL VOH tr,tf ----------------d F/F Conditions ----@ VDD /2 @ 600µA @ 600µA 10-90% ----------------O...