6P3SZ-E Datasheet | Unknown Manufacturer

6P3SZ, 6P3SZ-E (6n3C, 6n3C-E) General: Tetrode, used in output stages of low frequency amplifiers. Envelope: glass, with octal base. Mass: 70 g. General characteristic Type 6P3SZ 6,3 250 -14 6,3 250 -14 Filament voltage, Volt Anode voltage, Volt 1st grid voltage, Volt 2nd grid voltage, Volt Type 6P3SZ 900 ±90 72 ±18 no more than 9 880 ±40 73 ±13 no more than 6 Filament (heater) current, m A Anode current, m A 2nd grid current, m A 1st grid reverse current, mk A Cathode current, m A <3 < 0,5 no less than 275 - Output power, W Mutual conductance, m A/V Internal resistance, kΩ Inter electrode capacitance, p F: no less than 5,4 no less than 5,8 5,2 to 6,8 25 5,2 to 6,8 no more than 65 input output transfer Operation time, h 11±2 8,2 ±1.5 no more than 1 > 1000 11 6,7 no more than 1 > 5000 Free Datasheet http://../ Limited operating values: Type 6P3SZ 5,7-7 375 300 6-6.6 250 250 Filament voltage, V Anode voltage, V 2nd grid voltage, V Cathode - heater voltage, V Cathode current, m A Anode dissipation, W 2nd grid dissipation, W Resistance in 1st grid circuit, kΩ 100 20 2.75 90 / -200 90 20,5 2 Operating environmental conditions: Type 6P3SZ 1,5 50 -60 to +70 98 3 5 to 300 12 100 100 -60 to +160 98 Acceleration of vibration loads, g by frequencies, Hz Acceleration of multiple impacts, g Acceleration of single impact, g Continuos acceleration, g Ambient temperature, °С Relative humidity at up to 40 °C, % Plate and plate-grid curves Free Datasheet...