6P3S-E Datasheet | Unknown Manufacturer

Russian 6P3S, 6P3S-E = 6n3C, 6n3C-E General Tetrode, used in output stages of low frequency amplifiers. Envelope: glass, with octal base. Mass 70 g. Lead diagram General characteristics: Type Anode voltage, Volt 1 grid voltage, Volt 2 nd st 6P3S 6P3S-E 6.3 250 -14 250 6P3S 900±90 72±18 no more than 9 ≤3 6P3S-E 880±40 73±13 no more than 6 ≤ 0.5 250 -14 250 Filament voltage, Volt 6.3 grid voltage, Volt Type Filament (heater) current, m A Anode current, m A 2 nd st grid current, m A 1 grid reverse current, mk A Cathode current, m A Output power, W Mutual conductance, m A/V Internal resistance, kΩ Inter electrode capacitance, p F: Input Output Transfer Operation time, h Limited operating values: no less than 275 no less than 5.4 no less than 5.8 5.2 to 6.8 25 11±2 8.2±1.5 no more than 1 ≥ 1000 5.2 to 6.8 no more than 65 11 6.7 no more than 1 ≥ 5000 Free Datasheet http://../ Type Filament voltage, V Anode voltage, V 2nd grid voltage, V Cathode - heater voltage, V Cathode current, m A Anode dissipation, W 2 nd 6P3S 6P3S-E 5,7-7 6-6.6 375 300 100 20 2.75 250 250 90 / -200 90 20.5 2 150 grid dissipation, W st Resistance in 1 grid circuit, kΩ 500 Operating environmental conditions : Type Acceleration of vibration loads, g by frequencies, Hz Acceleration of single impact, g Continuos acceleration, g Ambient temperature, °С 6P3S 1.5 50 6P3S-E 3 5 to 300 12 100 100 98 Acceleration of multiple impacts, g - -60 to +70 -60 to +160 Relative humidity at up to 40° C, % 98 Plate and plate-grid curves Free Datasheet...