Datasheet4U Logo Datasheet4U.com

ETA6010 - Precision Load Switch

General Description

The ETA6010 is a load switch which provides full protection to systems and loads which may encounter large current conditions.

ETA6010 offers a 95mΩ current-limited switch which can operate over an input voltage range of 2.5-5.5V.

Key Features

  • thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the parts operate in a constant-current mode to prohibit excessive currents from causing damage. The ETA6010 will not turn off after a current limit fault, but will rather remain in the constant current mode indefinitely. ETA6010 is housed in a tiny SOT23-5L package.

📥 Download Datasheet

Datasheet Details

Part number ETA6010
Manufacturer ETA
File Size 557.40 KB
Description Precision Load Switch
Datasheet download datasheet ETA6010 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ETA1483 18V High Efficiency Synchronous Step-Down Converter ETA solutions
ETA1485 18V High Efficiency Synchronous Step-Down Converter ETA solutions

Other Datasheets by ETA

Part Number Description
ETA6011 5V/1A Constant Current Linear LED Driver
ETA6012 5V/1A High Brightness LED Driver
ETA6017 1.5V/2A Buck Converter and 5V Linear Charger
ETA6002 3MHz Switching Charger
ETA6003 3MHz Switching Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ETA6010 Precision Load Switch with Adjustable Current Limit DESCRIPTION The ETA6010 is a load switch which provides full protection to systems and loads which may encounter large current conditions. ETA6010 offers a 95mΩ current-limited switch which can operate over an input voltage range of 2.5-5.5V. The current limit can be externally programmed by a precision resistor, ranges from 75mA to 1.3A. Switch control is by a logic input (EN) capable of interfacing directly with low voltage control signals. Current is prevented from flowing when the switch is off and the output voltage is higher than the input voltage. ETA6010 also features thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating.