ELM626 detector equivalent, rs232 break detector.
* Low power CMOS design - typically 1mA at 5V
* No external timing elements required
* Complementary outputs
* Digitally controlled threshold timing
*.
* Remote resetting of RS232 devices
* Edge triggered one-shot circuits
* Digitally controlled sequencing sch.
The ELM626 is a complete circuit for detecting break signals on RS232 lines, in an 8 pin package. The circuit is similar to the ELM627 except that an output pulse is not generated on power-up.
The threshold for break signal detection is user selectab.
Image gallery
TAGS
Download (Size : 19.22KB)