KBPC3510W Datasheet | EIC Semiconductor

FEATURES : - High current capability - High surge current capability - High reliability - Low reverse current - Low forward voltage drop - Pb / Ro HS Free MECHANICAL DATA : - Case : Metal Case - Epoxy : UL94V-O rate flame retardant - Terminals : plated .25" (6.35 mm). Faston - Polarity : Polarity symbols marked on case - Mounting position : Bolt down on heat-sink with silicone thermal pound between bridge and mounting surface for maximum heat transfer efficiency. - Weight : 22.88 grams(approximately) 1.134 (28.8) 1.110 (28.2) 0.488 (12.4) 0.409 (10.4) 0.193 (4.9) 0.0413 (1.05) 0.0375 (0.95) 0.441 (11.2) 0.425 (10.8) 1.2 (30.5) MIN. Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current Tc = 55C Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Current Squared Time at t < 8.3 ms. Maximum Forward Voltage per Diode at IF = 17.5 A Maximum DC Reverse Current Ta = 25 C at Rated DC Blocking Voltage Ta = 100 C Typical Thermal Resistance (Note 1) Typical Thermal Resistance at Junction to Ambient Operating Junction Temperature...