TMCXM20 Description
Terminator™ II TMCX Cable Glands For use with metal-clad, TECK, unarmoured and tray cable http://../ Terminator™ II TMCX Cable Glands The ideal gland for terminating cable in hazardous locations The Terminator™ II TMCX Cable Gland is an armoured barrier, non-armoured barrier and TECK armoured gland used to terminate cable in hazardous locations.
TMCXM20 Key Features
- Metal-clad and TECK (interlocked and continuously welded corrugated armoured) cable Unarmoured and tray cable
- Class I, Division 1, Groups A, B, C, D Class II, Groups E, F ,G Class III NEMA 6P UL/cULus Listed
- File No. E122485 IECEx/ATEX (Pending)
- Designed to minimize the opportunity for incorrect assembly Simple selection process and field preparation aids to ensur
- the use of slip rings with snap-in features enables the TMCX to retain all of the ponents in the entry end of the gland.
- the design allows for a two-piece assembly gland, minimizing tightening and loosening of nuts. g Red anodized nut
- this hard-wearing, permanent, consistent coating is standard on all units. c Anti-rotation feature
- for single tool assembly; the splined shaft ensures that the two assemblies lock together and do not rotate during assem
- Chico® LiquidSeal or standard TSC epoxy pound options allow for rapid curing and assembly in any orientation. o Conical
- ensures that double the misalignment can be accepted without the risk of binding. m Captive garter spring