Datasheet4U Logo Datasheet4U.com

PAM2804 - HIGH EFFICIENCY LED DRIVER

Description

The PAM2804 is a step-down constant current LED driver.

When the input voltage is down to lower than LED forward voltage, then PAM2804 goes into LDO mode.

Features

  • include undervoltage lockout to prevent deep battery discharge of the Li+ battery.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PAM2800 High Power White LED Driver Power Analog Micoelectronics
PAM2801 1W High Power White LED Driver Power Analog Micoelectronics
PAM2803 3W High Power White LED Driver Power Analog Micoelectronics
PAM2810 4-Channel Programmable LED Current Sink Power Analog Micoelectronics
PAM2842 High Power LED Driver Power Analog Micoelectronics

Other Datasheets by Diodes Incorporated

Part Number Description
PAM2800 HIGH POWER WHITE LED DRIVER
PAM2803 3W HIGH POWER WHITE LED DRIVER
PAM2805 3-MODES / 3W WLED DRIVER
PAM2808 5W HIGH POWER HBLED DRIVER
PAM2841 40V PRECISION WLED DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PAM2804 1A STEP-DOWN CONSTANT CURRENT, HIGH EFFICIENCY LED DRIVER Description The PAM2804 is a step-down constant current LED driver. When the input voltage is down to lower than LED forward voltage, then PAM2804 goes into LDO mode. Pin Assignments Top View TSOT25 The PAM2804 supports a range of input voltages from 2.5V to 6.0V, allowing the use of a single Li+/Li-polymer cell, 3AA or 4AA cell, USB, and other standard power sources. The FB voltage is only 0.1V to achieve high efficiency. PAM2804 employs internal power switch and synchronous rectifier to minimize external part count and realize high efficiency. During shutdown, the input is disconnected from the output and the shutdown current is less than 1µA.
Published: |