Datasheet4U Logo Datasheet4U.com

PAM2307 - 3A LOW NOISE STEP-DOWN DC-DC CONVERTER

Description

The PAM2307 is a 3A step-down DC-DC converter.

At heavy load, the constant-frequency PWM control performs excellent stability and transient response.

No external compensation components are required.

Features

  • include over-temperature and short circuit protection, and under-voltage lockout to prevent deep battery discharge. The PAM2307 delivers 3A maximum output current while consuming only 42µA of no-load quiescent current. Ultra-low RDS(ON) integrated MOSFETs and 100% duty cycle operation make the PAM2307 an ideal choice for high output voltage, high current.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PAM2301 800mA Step-Down DC-DC Converters Power Analog Micoelectronics
PAM2305 1A Step-Down DC-DC Converters Power Analog Micoelectronics
PAM2306 Dual High-Efficiency PWM Step-Down DC-DC Coverter Power Analog Micoelectronics
PAM2308 Dual High-Efficiency PWM Step-Down DC-DC Coverter Power Analog Micoelectronics
PAM2400 3-Pin Synchronous Step-Up DC/DC Converter Power Analog Micoelectronics

Other Datasheets by Diodes Incorporated

Part Number Description
PAM2301 800mA STEP-DOWN DC-DC CONVERTER
PAM2303 3A STEP-DOWN DC-DC CONVERTER
PAM2304 1A STEP-DOWN DC-DC CONVERTER
PAM2305 1A STEP-DOWN DC-DC CONVERTER
PAM2305D 1A STEP-DOWN DC-DC CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A Product Line of Diodes Incorporated PAM2307 3A LOW NOISE STEP-DOWN DC-DC CONVERTER Description The PAM2307 is a 3A step-down DC-DC converter. At heavy load, the constant-frequency PWM control performs excellent stability and transient response. No external compensation components are required. The PAM2307 supports a range of input voltages from 2.7V to 5.5V, allowing the use of a single Li+/Li-polymer cell, multiple Alkaline/ NiMH cell,and other standard power sources. The output voltage is adjustable from 0.6V to the input voltage. The PAM2307 employs internal power switch and synchronous rectifier to minimize external part count and realize high efficiency. During shutdown, the input is disconnected from the output and the shutdown current is less than 1µA.
Published: |