Datasheet4U Logo Datasheet4U.com

NA555 - Precision Timer

General Description

These devices are precision timing circuits capable of producing accurate time delays or oscillation.

In the timedelay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network.

Key Features

  • Timing from microseconds to hours Astable or monostable operation Adjustable duty cycle TTL compatible output can source or sink up to 200mA “Green” Molding Compound (No Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www. diodes. com/products/lead_free. html. Notes: NE555/SA555/NA555 Document number: DS35112 Rev. 4 - 2 1 of 1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NA555 Precision Timer Texas Instruments
NA555D Precision Timer Texas Instruments
NA555P Precision Timers Texas Instruments
NA556 Dual Precision Timers Texas Instruments
NA51 3.5Amp complementary power transistors National Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
NA555S Precision Timer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NE555/SA555/NA555 PRECISION TIMERS Description These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the timedelay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high.