Datasheet4U Logo Datasheet4U.com

APX803S - 3-PIN MICROPROCESSOR RESET CIRCUIT

General Description

The APX803S is used for microprocessor (µP) supervisory circuits to monitor the power supplies in µP and digital systems.

They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5.0V, 3.3V, 3.0V and 2.5V powered circuits.

Key Features

  • Precision Monitoring of 2.5V, 3.0V, 3.3V, and 5.0V Power-Supply Voltages.
  • Fully Specified Over Temperature.
  • Open-drain RESET Active Low.
  • Power-On/Power Supply Glitch Reset Pulse.
  • APX803S00 1.7ms (Typ. ).
  • APX803S05 50ms (Typ. ).
  • APX803S 240ms (Typ. ).
  • 10µA Supply Current (Typ. ).
  • Guaranteed Reset Valid to VCC = 1V.
  • Totally Lead-Free & Fully RoHS Compliant (Note 1 & 2).
  • Halogen and Antimony Free. “Gr.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
APX8131 Hall Effect Micro Switch ANPEC
APX8132 Hall Effect Micro Switch ANPEC
APX1117 1A LOW DROPOUT POSITIVE ADJUSTABLE Diodes Incorporated
APX1690 9-Set Over Voltage Protector Anpec Electronics
APX284 High Sensitivity Hall-Effect Sensor ANPEC

Other Datasheets by Diodes Incorporated

Part Number Description
APX803 3-PIN MICROPROCESSOR RESET
APX803L MICRO POWER VOLTAGE DETECTOR
APX809 3-PIN MICROPROCESSOR RESET CIRCUITS
APX809S 3-PIN MICRO POWER VOLTAGE DETECTOR
APX810 3-PIN MICROPROCESSOR RESET CIRCUITS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT APX803S 3-PIN MICROPROCESSOR RESET CIRCUIT Description The APX803S is used for microprocessor (µP) supervisory circuits to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5.0V, 3.3V, 3.0V and 2.5V powered circuits. These circuits perform a single function: they assert a reset signal on power up and whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for a fixed period of time after VCC has risen above the reset threshold. For the APX803S this period is a minimum of 1ms while for other APX803S variants it is at least 140ms.