Datasheet4U Logo Datasheet4U.com

AP62600 - 6A SYNCHRONOUS BUCK CONVERTER

General Description

The DIODES™ AP62600 is a 6A, synchronous buck converter with a wide input voltage range of 4.5V to 18V.

The device fully integrates a 36mΩ high-side power MOSFET and a 14mΩ low-side power MOSFET to provide high-efficiency step-down DC-DC conversion.

Key Features

  • VIN: 4.5V to 18V.
  • Output Voltage (VOUT): 0.6V to 7V.
  • 6A Continuous Output Current.
  • 0.6V ± 1% Reference Voltage.
  • 360μA Quiescent Current.
  • Selectable Switching Frequency.
  • 400kHz.
  • 800kHz.
  • 1.2MHz.
  • Selectable Operation Modes.
  • Pulse Frequency Modulation (PFM).
  • Ultrasonic Mode (USM).
  • Pulse Width Modulation (PWM).
  • Programmable Soft-Start Time.
  • Proprietary Gate Driver Design for Best EMI Reduction.
  • Power-Good Indicator.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP6203A 300mA Linear Regulator Anwell Semiconductor
AP6203B 300mA Linear Regulator Anwell Semiconductor
AP6203L 300mA Linear Regulator Anwell Semiconductor
AP6209 250mA Low- Quiescent Current Linear Regulator Anwell Semiconductor
AP6210 WiFi 802.11b/g/n + BT4.0 SIP AMPAK

Other Datasheets by Diodes Incorporated

Part Number Description
AP62150 1.5A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62200 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62200T 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62201 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62250 2.5A LOW IQ SYNCHRONOUS BUCK CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP62600 4.5V TO 18V INPUT, 6A SYNCHRONOUS BUCK CONVERTER Description The DIODES™ AP62600 is a 6A, synchronous buck converter with a wide input voltage range of 4.5V to 18V. The device fully integrates a 36mΩ high-side power MOSFET and a 14mΩ low-side power MOSFET to provide high-efficiency step-down DC-DC conversion. The AP62600 device is easily used by minimizing the external component count due to its adoption of Constant On-Time (COT) control to achieve fast transient response, easy loop stabilization, and low output voltage ripple. The AP62600 design is optimized for Electromagnetic Interference (EMI) reduction.