Datasheet4U Logo Datasheet4U.com

AP4310A - DUAL OP AMP AND VOLTAGE REFERENCE

Description

The device contains two Op Amps and a 2.5V precision shunt voltage reference.

Features

  • increased precision with a corresponding reduction in system complexity and cost. The AP4310A is available in SO-8 package. Pin Assignments (Top View) OUTPUT 1 1 INPUT 1- 2 INPUT 1+/VKA 3 GND 4 8 VCC 7 OUTPUT 2 6 INPUT 25 INPUT 2+ Features OP Amp.
  • Input Offset Voltage: 0.5mV.
  • Supply Current: 75A per OP Amp at 5.0V Supply Voltage.
  • Unity Gain Bandwidth:1MHz.
  • Output Voltage Swing: 0 to VCC-1.5V.
  • Power Supply Range: 3 to 36V Voltage Reference.
  • Fixed Output Voltage R.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP4310 DUAL OP AMP AND VOLTAGE REFERENCE BCD Semiconductor
AP431 ADJUSTABLE PRECISION SHUNT REGULATOR Diodes Incorporated
AP431 Adjustable Precision Shunt Regulator Anachip
AP4312 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER Diodes Incorporated
AP4313 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER BCD Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP4310E DUAL OP AMP AND VOLTAGE REFERENCE
AP4312Q CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP4313 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP431I LOW CATHODE CUREENT ADJUSTABLE PRECISION SHUNT REGULATOR
AP431S LOW CATHODE CURRENT ADJUSTABLE PRECISION SHUNT REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A Product Line of Diodes Incorporated AP4310A DUAL OP AMP AND VOLTAGE REFERENCE Description The AP4310A is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies The device contains two Op Amps and a 2.5V precision shunt voltage reference. Op Amp 1 is designed for voltage control with its noninverting input internally connected to the output of the shunt regulator. Op Amp 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corresponding reduction in system complexity and cost. The AP4310A is available in SO-8 package.