Datasheet4U Logo Datasheet4U.com

AP22800 - 5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH

General Description

The AP22800 is an integrated N-channel load switch, which

Key Features

  • an adjustable ramp-up and discharge rate that are settable via an external capacitor and a resistor, respectively. In addition, it incorporates a ‘power good’ output to flag when the switch is enhanced. The N-channel MOSFET has a typical RDS(ON) of 16mΩ, enabling current handling capability of up to 4A. The AP22800 is designed to operate from 1.5V to 5.5V making it ideal for 1.8V, 2.5V, 3.3V, 5V voltage rails. The low quiescent supply current specification of 21µA makes it ideal for use in batte.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP2201 RF ULDO REGULATOR BCD Semiconductor
AP2201 PFM Control Step-Up Switching Regulator Chipown
AP2202 RF ULDO REGULATOR BCD Semiconductor
AP2203 RF ULDO REGULATOR BCD Semiconductor
AP2204 WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR BCD Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP2280 Single Channel Slew Rate Controlled Load Switch
AP22802 SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP22804 SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP2281 Single Slew Rate Controlled Load Switch
AP22811 SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT AP22800 5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH Description The AP22800 is an integrated N-channel load switch, which features an adjustable ramp-up and discharge rate that are settable via an external capacitor and a resistor, respectively. In addition, it incorporates a ‘power good’ output to flag when the switch is enhanced. The N-channel MOSFET has a typical RDS(ON) of 16mΩ, enabling current handling capability of up to 4A. The AP22800 is designed to operate from 1.5V to 5.5V making it ideal for 1.8V, 2.5V, 3.3V, 5V voltage rails. The low quiescent supply current specification of 21µA makes it ideal for use in battery powered distribution systems where power consumption is a concern.