Datasheet4U Logo Datasheet4U.com

AL5801 - ADJUSTABLE CURRENT SINK LINEAR LED DRIVER

Description

The AL5801 combines a 100V N-channel MOSFET with a prebiased NPN transistor to make a simple, small footprint LED driver.

The LED current is set by an external resistor connected from REXT pin (4) to GND pin (6).

Features

  • Feedback pin reference voltage VRSET = 0.56V at +25ºC -40 to +125ºC temperature range 1.1V to 100V open-drain output Negative temperature VRSET co-efficient automatically reduces the LED current at high temperatures Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Low thermal impedance SOT26 package with copper lead frame.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AL5 Output Pentode Philips
AL5 Endpenthode Philips
AL5100 AL5000 Family Chipset Alereon
AL511 LCD Monitor ACER
AL511 LCD Monitor ETC

Other Datasheets by Diodes Incorporated

Part Number Description
AL5802 CURRENT SINK LED DRIVER
AL5802LP LED DRIVER
AL5802LP-7 LED DRIVER
AL5802LP4 ADJUSTABLE CURRENT SINK LINEAR LED DRIVER
AL5802LPL LED DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AL5801 100V, ADJUSTABLE CURRENT SINK LINEAR LED DRIVER Description The AL5801 combines a 100V N-channel MOSFET with a prebiased NPN transistor to make a simple, small footprint LED driver. The LED current is set by an external resistor connected from REXT pin (4) to GND pin (6). The internal pre-biased transistor develops approximately 0.56V across the external resistor. The AL5801 open-drain output can operate from 1.1V to 100V enabling it to operate 5V to 100V power supplies without additional components. PWM dimming of the LED current can be achieved by driving the BIAS pin (1) with an external, open-collector NPN transistor or open-drain N-channel MOSFET. The AL5801 is available in a SOT26 package and is ideal for driving LED currents up to 350mA.
Published: |