Datasheet4U Logo Datasheet4U.com

AH3582 - HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR

General Description

The AH3582 is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in industrial and consumer home appliances and personal care applications.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AH350 Linear Hall-Effect Sensors Anachip
AH3502 Linear Hall ETC
AH3503 LINEAR HALL-EFFECT SENSOR NANJING AH ELECTRONICS
AH3 High Dynamic Range Gain Block WJ Communication
AH3 High Dynamic Range Gain Block TriQuint Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AH3562Q HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH
AH3563Q HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH
AH3564Q HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH
AH3572 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH
AH3574 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT AH3582 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR WITH INTERNAL PULL_UP RESISTOR Description The AH3582 is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in industrial and consumer home appliances and personal care applications. To support wide range of demanding applications, the design has been optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3582 provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply.