Datasheet4U Logo Datasheet4U.com

ND12S0A0V50 - DC/DC Power Modul

General Description

The ENABLE (on/off) input allows external circuitry to put the ND converter into a low power dissipation (sleep) mode.

Positive ENABLE is available as standard.

Positive ENABLE units of the ND series are turned on if the ENABLE pin is high or floating.

Key Features

  • High Efficiency: 93% @ 12Vin, 3.3V/50A out Size: 61.0x31.8x10.2mm (2.40”×1.25”×0.40”) Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 3.63Vdc via external resistors Fixed frequency operation Single-in line package (SIP) Input UVLO, output OCP, OTP, SCP Remote ON/OFF (Positive) Power good output signal (open collector) Output voltage sense ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS18001 certified manufacturing facility UL/cUL 60950 (US & Canada.

📥 Download Datasheet

Datasheet Details

Part number ND12S0A0V50
Manufacturer Delta Electronics
File Size 576.22 KB
Description DC/DC Power Modul
Datasheet download datasheet ND12S0A0V50 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ND101 Antenna Switching Pin Diode AUK
ND102 Antenna Switching Diode AUK
ND102M4AL Antenna Switching Diode Array AUK
ND102M4L Antenna Switching Diode Array AUK
ND102M6L Antenna Switching Diode Array AUK

Other Datasheets by Delta Electronics

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FEATURES High Efficiency: 93% @ 12Vin, 3.3V/50A out Size: 61.0x31.8x10.2mm (2.40”×1.25”×0.40”) Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 3.63Vdc via external resistors Fixed frequency operation Single-in line package (SIP) Input UVLO, output OCP, OTP, SCP Remote ON/OFF (Positive) Power good output signal (open collector) Output voltage sense ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS18001 certified manufacturing facility UL/cUL 60950 (US & Canada), TUV (EN60950) --pending Delphi ND Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V~3.63Vout, 50Aout www.DataSheet4U.