Datasheet4U Logo Datasheet4U.com

DS2153Q - E1 Single-Chip Transceiver

Description

The DS2153Q T1 Single-Chip Transceiver (SCT) contains all of the necessary functions for connection to E1 lines.

The onboard clock/data recovery circuitry coverts the AMI/HDB3 E1 waveforms to a NRZ serial stream.

Features

  • Complete E1(CEPT) PCM-30/ISDN-PRI transceiver functionality Onboard line interface for clock/data recovery and waveshaping 32-bit or 128-bit jitter attenuator Generates line build-outs for both 120-ohm and 75-ohm lines Frames to FAS, CAS, and CRC4 formats Dual onboard two-frame elastic store slip buffers that can connect to backplanes up to 8.192 MHz 8-bit parallel control port that can be used on either multiplexed or non-multiplexed buses Extracts and inserts CAS signaling Detects and generate.

📥 Download Datasheet

Datasheet Details

Part number DS2153Q
Manufacturer Dallas Semiconducotr
File Size 442.96 KB
Description E1 Single-Chip Transceiver
Datasheet download datasheet DS2153Q Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS21552 T1 Single-Chip Transceivers Maxim Integrated
DS215W SCHOTTKY BARRIER RECTIFIERS AiT Components
DS215W Surface Mount Schottky Barrier Rectifier Jingdao Microelectronics
DS215W Surface Mount Schottky Barrier Rectifier Rectron
DS215W Surface Mount Schottky Barrier Rectifier BLUE ROCKET ELECTRONICS

Other Datasheets by Dallas Semiconducotr

Part Number Description
DS2151Q T1 Single-Chip Transceiver
DS2152 Enhanced T1 Single-Chip Transceiver
DS2154 Enhanced E1 Single Chip Transceiver
DS2155 T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface
DS2156 T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS2153Q E1 Single-Chip Transceiver www.dalsemi.com FEATURES Complete E1(CEPT) PCM-30/ISDN-PRI transceiver functionality Onboard line interface for clock/data recovery and waveshaping 32-bit or 128-bit jitter attenuator Generates line build-outs for both 120-ohm and 75-ohm lines Frames to FAS, CAS, and CRC4 formats Dual onboard two-frame elastic store slip buffers that can connect to backplanes up to 8.
Published: |