Datasheet4U Logo Datasheet4U.com

DC145 - 145 Centres Bar Clamp

Description

Dynex offers a range of standard clamps designed to accommodate press pack semiconductors with tie rod centres from 75mm to 210mm and clamping force from 5kN to 138kN.

The set clamps use Disc Springs to DIN 2092/2093 to apply the clamping force over a wide temperature range.

📥 Download Datasheet

Datasheet Details

Part number DC145
Manufacturer DYNEX
File Size 207.96 KB
Description 145 Centres Bar Clamp
Datasheet download datasheet DC145 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DC1417J5005AHF Ultra Low Profile 0805 5 dB Directional Coupler Anaren
DC1000 Digital Controller Product Manual Honeywell
DC1010 Digital Controller Product Manual Honeywell
DC1012 Power Inductors Coilcraft
DC1012-103L Power Inductors Coilcraft

Other Datasheets by DYNEX

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Replaces DS6381-3 DC145 145 Centres Bar Clamp DS6381-4 September 2022 LN42053 DESCRIPTION Dynex offers a range of standard clamps designed to accommodate press pack semiconductors with tie rod centres from 75mm to 210mm and clamping force from 5kN to 138kN. The set clamps use Disc Springs to DIN 2092/2093 to apply the clamping force over a wide temperature range. The clamps also incorporate pressure indicators to make installation simple. Isolation is provided by high quality ceramic insulators and PTFE sleeving. Zinc plating with a Yellow Passivated finish is used for enhanced corrosion protection. If a clamp you require is not available in our standard range, Dynex can provide a clamping solution to your individual needs. Speak to your local sales representative for details.
Published: |